Bellima Baler | Douglas Lake Equipment & Avenue Machinery
Call Sales


Get More InformationChat with usEvaluate my trade
Bellima 0
Bellima 1
Bellima 2
Bellima 3
Bellima 4
Bellima 5
Bellima 6

Bellima F 125 | F 130

  • The fixed chamber baler with simple design
  • Low dead weight
  • Net and/or twine wrapping
  • Chain-and-slat elevator for smooth & efficient operation
  • The enclosed bale chamber minimizes fragmentation
  • Elevator slats mesh with the crop for effective bale roll
  • The mechanical rear door saves the hydraulic system
  • Versatile machine for all types of crop
  • Simple, low-maintenance design


The pick-up on Bellima F 125 offers a 1.40 m (4’7″) work width (to DIN 11220) and hydraulic operation and height control. The small space between the pick-up and the bale chamber ensures an optimum crop gathering and a consistent flow of the material into the machine.

  • Ideal 1.80 m (5’11”) work width for biggest swaths
  • Packers ensure a consistent crop flow
  • Augers on the sides optimize the material flow
  • Pneumatic gauge wheels provide quiet running

The extra wide pick-up with packer is standard specification on Bellima F 130. Arranged close to the tines and to the starter roller inside the bale chamber, the packer tines ensure  a consistent flow of the crop even in short chops, boosting intake capacity and productivity.

The packer supports the pick-up and improves the material flow from the pick-up to the starter roller plus ensures the chamber is filled uniformly.

Chain-and-slat elevator

  • Consistent 1.20 m (3’11”) bale diameters
  • Effective bale roll, no stops, less fragmentation
  • Low power input
  • Simple design with only one drive chain

The concept of the chain-and-slat elevator has proven extremely well in silage, hay and straw harvesting around the world. The endless chain-and-slat elevator forms bales of extremely high densities, exerting a firm grip on the bale and ensuring a constant roll – even in short and dry material Another advantage is reduced fragmentation and low power input.

The enclosed bale chamber with the endless chain-and-slat elevator on Bellima rolls the bale by adding layer after layer, forming densely packed and well-shaped bales. The machine’s great feeding properties allow the elevator to start bale rolls earlier and so the baling cycle finishes earlier as well. Another boon is the denser core. Packing more material and density into each bale translates into higher-quality silage and better exploitation of truck capacities.

By meshing with the material, the chain-and-slat elevator ensures effective bale roll and highest densities.

The art of refinement

Positive bale starts: The profiled starter roller takes care of an instant bale start, optimizes the entire process and takes load off the rear door, which is ideal when baling heavy silage bales.

Pressure indicators on either side: Baling pressure indicators on either side of the machine show the current loading inside the chamber so the operator can correct his steering and ensure the chamber is filled uniformly – for uniform bale densities and shapes.

Little helpers: An audible / LED alarm is available as an option to indicate acoustically and visually when the baling pressure is right so the operator can trigger the twine wrapping cycle.

The bale ejector with integral tray ejects the bale fast and effectively. It allows the baler to start the next baling cycle while the tailgate is still closing. This small detail allows you to bale up to six extra bales per hour!

Twin twine wrapping system

  • Two threads cut down on the wrapping cycle
  • Well-shaped bales as tying starts / ends in the middle of the bale
  • Selectable thread spacing
  • Very easy-to-use system

A twin twine tying system cuts down on machine downtime, increases output per hour, saves on fuel and labour cost and increases your output and productivity. The KRONE twin twine tying system places the twine ends in the middle of the bale and not on the edges. So the bales will not lose shape as they are handled several times over.

A coned pulley controls the number of twine layers applied per cycle. Two threads run through drivers from the centre to either side and back to the centre of the chamber where they are cut at the end of the tying cycle. Tying is triggered hydraulically, electrically or mechanically.

Net wrapping

  • Short baling cycles for more bales per hour
  • Bales break up quickly and easily in animal buildings
  • Effective start of the wrapping cycle, short feed distances

The net wrapping system is straightforward by design and offers superior functionality. Net wrapping is faster than twine tying so boosting your hourly throughputs. Higher throughputs free up time for other jobs and cut fuel consumption per bale.
The net wrap system accepts KRONE excellent net rolls with a total net length of up to 3,000 m (11,811′).

The net wrapping unit takes 2600 m and 3000 m (8,530′ and 11,811′) net rolls and is located on the front end of the machine for excellent visibility and monitoring. There is room for one spare roll.

Available At


1521 Sumas Way
Abbotsford, British Columbia V2S 7P4

Phone number

More Info


1090 Stevens Rd
West Kelowna, British Columbia V1Z 1A3

Phone number

More Info


7155 Meadowlark Rd
Vernon, British Columbia V1B 3B6

Phone number

More Info
Price, payments and models featured throughout may vary by dealer. Some restrictions apply. Offers are subject to change, cancellation or extension at any time without notice or obligation. For all offers: taxes, applicable fees (including, but not limited to, governmental environmental fees, administration fees, set-up fees, dealer fees, and delivery fees), insurance and registration are extra. Specifications, features, illustrations and equipment shown online are based on the latest available information at the time of publication. Although descriptions are believed to be correct, accuracy cannot be guaranteed. We reserve the right to make changes at any time without notice or obligation, specifications, accessories, materials, models, prices, payments, and other information.

Looking for more inventory? Try our Avenue Machinery Locations

New Equipment Pre Owned Equipment