Penta 9630 Double Auger Trailer Trailer Mixers | Douglas Lake Equipment & Avenue Machinery
Call Sales

Penta 9630 Double Auger Trailer

Get More InformationChat with usEvaluate my trade
Penta 9630 Double Auger Trailer
Penta 9630 Double Auger Trailer 0
Penta 9630 Double Auger Trailer 1
Penta 9630 Double Auger Trailer 2
Capacity 9″ Rubber925 cu ft26 m3
Minimum Horsepower180 HP 
Total Width101 in257 cm
Total Length333 in846 cm
Total Height119 in302 cm
Loading Height114 in289 cm
Empty Weight23,547 lbs10,680 kg
Corner Door Unloading HeightImperialMetric
Without chute31 in79 cm
With chute26 in66 cm
Unloading Heights       
DualFixed Incline2′3′4′5′6′7′



The largest challenge facing a TMR mixer is the ability to process forages with a variety of supplements such as salts and fine minerals. This process can prove to be time consuming and costly. Our patented Hurricane Auger has been designed to produce better mixes by allowing forages to circulate faster through the mix, resulting in quicker processing and mixing times.

Penta Hurricane Augers are equipped with patented cut outs that allow material to drop through the auger. The falling action complements the regular motion of the ingredients being rotated throughout the tub. This combination of mixing actions has proven effective in producing more consistent mix.


One look at our Hurricane augers and you will see their strength and power. Critical to our auger design is durability. With high-intensity forces encountered in the initial stages of cutting, the metal blades of the auger are subjected to severe pressure as the turning motion begins and the feed ingredients are pushed upwards. From the 3/4″ steel that is cold pressed into shape for our flighting, to the massive 3/8″ thick tube, the flighting is expertly welded. Developed over years of testing and design, you can clearly see this is our best, most rugged and reliable auger yet.

The angle and diameter of the flighting are designed to work with the tub for the best mixing and processing of your ration. The pyramid shape of the Hurricane Auger reduces pressure on the system’s moving parts, dispersing the forces through the body of the auger and prolonging the life of the blades. Our unique design ensures maximum blade contact with fibrous raw materials to make the cutting process rapid and complete. The high-wear stainless steel lead edge on the sweep has virtually no gap at the floor, dramatically reducing horsepower and providing excellent clean out. The bolt-on stainless steel plow blade keeps material from building up on the sides and turns material for even more mixing action.


Optional conveyors are configured to match the needs of your individual operations with a choice of either a Flip-up or Dual configuration. Built for long life and dependability, each system is equipped with C188 chain, the heaviest cast chain in the industry. This chain is driven using a very powerful North American made hydraulic motor.

Flip-up conveyors are configured for either left or right hand delivery, allowing you to reach up and out to get the feed into bunks. Our standard conveyor includes a stainless steel pan and rails. we offer many available options to customize these conveyor systems to feed into a variety of bulks and feed alleys.


Penta augers are equipped with 3 different styles of deep serrated, heat-treated, tungsten carbide knives. Different knife styles and mounting options give you the flexibility to process any type of feed (hay, haylage, silage, straw, by products, corn, and soybean stalks), making Penta mixers the best option for all operations, delivering results no matter what your nutritional needs.


Our drives will process any type of feed, from hay to silage to corn and soybeans stalks. Your PTO power is transferred to the drives through a two speed gear box for optimal mixing and a faster, more complete clean out. Our single auger mixers use the corner planetary gear box to drive the auger, backed by our standard 3 year warranty. Our Twin and triple auger mixers use our heavy duty planetary gear box designed and built to our specifications and backed by a 5 year warranty.

The North American engineered gear box is able to be used in most mixer models. this box allows flexibility to run 1000 RPM or 540 RPM. The key is to reduce the heat buildup in the mixing process. The 2 part design allows heat to dissipate in the lower box before transferring to the planetary.


Our PTO shafts deliver power to the mixers through all splined connections. This is the most efficient and reliable way to transfer power from your tractor to the mixer. Providing protection to our shafts are standard shear bolts and optional cam style torque limited clutches. The shear bolts provide simple, straightforward protection for your equipment, while the torque limited delivers peace of mind and automatic resetting with no wear parts.


Our high-visibility oil reservoirs are located as close as possible to the gear boxes for the best performance, ease of use, and maintenance. The high quality reservoirs are crystal clear for the easiest visual checks on oil level. On our multi-auger mixers the reservoirs are nestled between the augers for even greater visibility and protection. We use only full synthetic oil that will not break down during temperature fluctuations.


Designed to give you a platform to monitor and evaluate the progress of your mix, our viewing platform provides much more. With access from the left and right of the mixer, not only is it easier to get where you need you be, but you can also have a safe passage from one side of the machine to the other without going all the way around. Built into the design are hand holds and mounts for oil reservoirs on single auger and scale mounts.


Our frames are made of 1/2″ and 3/4″ North American steel, not hollow tubes. This is a design borrowed from the industrial/construction industry. This provides not only extreme ruggedness to our platform, but also cuts down on the profile of the frame and helps with our clean, compact design. This design will also eliminate any condensation build up and allows a greater flexibility to add component options.


Our straight-walled tub is designed to reduce the compaction of your feed and will minimize over-processing by allowing more room for the material to aerate. The floor of the tub is subjected to high abrasion and heavy impacts. To ensure our mixers will endure long hours of extreme use, the floor is constructed out of a solid piece of 3/4″ 44w high wear, acid resistant steel. The angled curve of the tub and baffles are designed to work with our Hurricane Augers for the best mix possible and provide an easy clean out. the tub ends are rolled formed and the robot welded for a smooth, consistent curve that resists material build up and has an incredibly strong bond to both sides. All the tubs can be manufactured with a stainless steel liner that will give on average 10 years of life to mixers that operate in very wet feed conditions. Liners are installed 30″ high to ensure maximum protection.


Our 600 cu ft and up models come with an off road suspension, reducing wear and tear on the tractor and mixer.

We use only high quality, non-imported bearings in our axles. In addition there are different configurations that can incorporate brakes and steering options.


For the most efficient unloading and complete clean out, our front and rear material doors are 44″-48″ wide on all models.

Available At


1521 Sumas Way
Abbotsford, British Columbia V2S 7P4

Phone number

More Info
Price, payments and models featured throughout may vary by dealer. Some restrictions apply. Offers are subject to change, cancellation or extension at any time without notice or obligation. For all offers: taxes, applicable fees (including, but not limited to, governmental environmental fees, administration fees, set-up fees, dealer fees, and delivery fees), insurance and registration are extra. Specifications, features, illustrations and equipment shown online are based on the latest available information at the time of publication. Although descriptions are believed to be correct, accuracy cannot be guaranteed. We reserve the right to make changes at any time without notice or obligation, specifications, accessories, materials, models, prices, payments, and other information.

Looking for more inventory? Try our Avenue Machinery Locations

New Equipment Pre Owned Equipment