The enclosed and fully welded cutterbar meets the highest quality standards and operates dependably and leak-free over many years of hard work. Massive and oil-immersed spur gears impress by very quiet and reliable running in sustained peak-load operation.
The wedge-shaped cutterbar offers many height setting options. The spur gears run in massive double bearings, allowing the cutterbar to handle extremely high loads.
The established satellite drives were developed by KRONE and have proven extremely well all over the world for as many as 30 years now.Its massive spur gears with up to 59 teeth transmit the drive power down to the very last disc. The large-diameter gears rotate at reduced speeds, with a higher number of teeth meshing with the neighbouring gearwheels for even quieter running, ultimate efficiency and maximum longevity. The auxiliary gears drive one disc each and as a result are exposed to only minimum loading.
The cutterbar is driven by the right-angle gearbox just behind the inner top hat – for blockage-free operation on headlands and in awkward patches.
With some discs turning in pairs towards each other and others turning away from each other, it was necessary to redesign the degree of blade overlap to ensure cleanest cuts. For stripeless cuts in light and young crops, we have therefore increased blade overlaps on the discs turning outwards. In addition, the blades turning to the rear are set further apart to encourage a smooth flow of large volumes of crop.
We welded curved stops between the individual skids that protect the cutterbar from damage and also contoured the underside of the stops in such a way that no material can build up here and instead flows smoothly to the rear.
There are many reasons for choosing an ActiveMow disc mower. Just think of the quickchange blades, the inexpensive wear parts and the perfect disc arrangement for stripeless cuts.
Quick-change blades are considered a must by many farmers and contractors. The blades are quick and easy to reverse or replace in situ.
Spare blades are neatly stored in this mobile drawer.
The curtain folds up for cleaning and replacing the blades – a compact design that offers superb accessibility.
The side-mounted linkage is compact, low in weight and gives the mower large up/down travel. The ActiveMow mowers follow any ground contours and have proven absolutely well in mountain applications.
The sturdy three-point headstock features a bracket to store the driveshaft after the machine is removed from the tractor.
Drive power flows through a frictional driveline of pto shafts and gears for maximum effciency even in diffcult conditions.
Manually adjusted, the ActiveMow suspension springs rapidly adapt the ground pressure for the machine to produce perfect cuts in undulating terrain and at high work rates and as a result of this clean and high-quality forage as well as a fast and uniform re-growth.
Stands are available as an option to store the machine either in work or transport position and save space in the machine shed during winter storage. The side guard folds automatically when ActiveMow moves into transport or park position, thereby reducing the machine’s height.
For convenient attachment/removal of the machine, release the spring tension simply by operating the latch on each spring. Such latches are specified on the ActiveMow R 240, R 280, R 320 and R 360 models where they eliminate the need for unhooking the coils.
To get ready for transport, ActiveMow folds into a 100° angle position behind the tractor. Taking weight off the right wheel, it increases the road stability of the combination. The operator enjoys an unobstructed rear view in the mirror.
The eccentric bearings are positioned in such a way that the discs feed the material to the middle of the machine for the tractor to straddle it. With discs spinning in the A sense of rotation, ActiveMow R 200, R 240, R 280 and R 320 form one single swath whereas the ActiveMow R 360 forms two swaths with its discs also spinning in the A sense of rotation.
Swathing is the preferred option in wet and boggy terrain so the tractor wheels will not run on the crop for loss-free pick-up or tedding.
With discs spinning in the B sense of rotation, ActiveMow spreads the material across the full cutting width. Here the discs turn in pairs towards each other.
Spreading the material across the full machine width instead of swathing, it exposes a larger surface to the sun and wind for boosted and more uniform wilting.
Replacing blades with the help of air
It‘s easy: Place the QuickChange claw spacer in the space between the disc with blade retaining pin and the blade carrier.
Operate the lever, applying air to the claws and pressing down the blade carrier.
The blade retaining pin is now exposed and you can remove, replace or reverse the blade. It‘s safe, simple and fast.
Position the new or reversed blade under the retaining pin and operate the lever again.
This removes the air and releases the claws, which in turn releases the knife carrier so this jacks up, locking home the blade retaining pin.
The new blade is now secured in position.
On-site use: Provided the tractor is equipped with an air compressor, QuickChange is easily used in the field.
Address
1521 Sumas Way
Abbotsford, British Columbia V2S 7P4
Phone number
604-864-2665
Address
7155 Meadowlark Rd
Vernon, British Columbia V1B 3B6
Phone number
250-545-3355
Address
1090 Stevens Rd
West Kelowna, British Columbia V1Z 1A3
Phone number
250-769-8700
