The most compact model in the range is the VariPack V 165 (XC) which has a specifically designed chamber that bales 0.80-1.65 m diameter bales.
The next model is the VariPack V 190 (XC). The chamber on this model produces 0.80 m and 1.90 m bales.
The wide EasyFlow pick-up makes sure no haulm is left on the ground even in difficult conditions and when working at high speeds. Thanks to its clutter-free build that relies on only very few moving parts, the unit stands out for minimum wear and maximum longevity.
KRONE has purposely removed the cam track from the EasyFlow for controlling the tines. Instead of using many moving parts that are prone to wear, EasyFlow has special strippers that ensure the tine angle is always right the length ideal. Measuring 6 mm in diameter and mounted with large coils, the tines are particularly vigorous and hard-wearing. Narrowly spaced at 55 mm, they pick up also short haulmed and heavy crops thoroughly and without contamination.
The crop press roller supports the work of the pickup by detecting the size of the swath and preparing it for effective gathering. The height is altered on a simple mechanism for easy and fast use and adaptation to varying crops, swath volumes and work rates. This results in clean and thorough gathering.
The pick-up runs on two gauge wheels the height of which is set easily and fast without the need of tools and simply by refitting a pin.
The integral rotor is available with or without a cutting system. Rugged by design, the unit performs dependably and reliability in challenging conditions. The integral rotor has feed augers integrated at its ends, a design that leads to a significant reduction of the number of moving parts. Fewer moving parts translate into better cleaning, less service and maintenance and a longer lifespan.
Integrating the feed rollers in the rotor leads to a very consistent and dependable feed of material from the pick-up to the rotor – another boon for the overall crop flow and reliable machine performance.
The pick-up and the integral rotor are driven by one shared 1 ¼inch chain. The simple and robust drive uses only few moving parts thus reduces wear and the time you spent servicing.
The floor under the cut-and-feed rotor drops at a flick of a button to remove blockages conveniently from the cab. With the floor down, the pto is operated to clear the blockage. Then the floor is raised again and baling continues.
VariPack 165 XC and 190 XC have a 17-blade cutting system that can be selected in groups of 0 / 8 / 9 / 17 blades to cut lengths of 128 mm or 64 mm for best results in all conditions.
The blades have long, curved cutting edges for particularly fuel-efficient cuts as the grass is pulled past them. The wavy edges cut all types of crops precisely and also offer extended sharpness. All blades are identical and interchangeable.
Each blade is spring-loaded for individual impact protection. Whenever it is hit by an object it retracts from the crop flow and automatically returns into working position after the object has passed. The other blades remain unaffected by this and continue cutting, ensuring a consistent quality of cut.
The double tines pull the material in a consistent flow through the blades, preventing any haulm to slip through and leading to higher bale weights, because cut material is baled to higher densities. The helix ensures there is no peak load in the cutting system for smooth operation and quiet running.The double tines pull the material in a consistent flow through the blades, preventing any haulm to slip through and leading to higher bale weights, because cut material is baled to higher densities. The helix ensures there is no peak load in the cutting system for smooth operation and quiet running.
This standard-fit dog clutch on the right machine side cuts off the powerflow to the intake system so the operator can rotate the rotor manually for convenient blade changes.
The VariPack chamber is made up of four endless belts that feature a smooth surface. This design makes VariPack the specialist baler for dry material such as straw and hay. The soft core kit allows you to produce bales for specific applications.
The VariPack model range is designed to deliver various bale diameters. VariPack V 165 (XC) produces 0.80-1.65 m diameter bales. VariPack V 190 (XC) churns out 0.80-1.90 m diameters. This way you can tailor the size of the bales to individual customer applications, for example feeding or drying.
Adjusting the bale diameter is as easy as it gets. Simply enter the target size in increments of 1 cm to the terminal. This convenient feature allows you to tailor the bale to specific applications.
Enter the core density and the density of the inner and outer layers on the operator terminal and the machine produces bales to individual customer requirements and applications. Maximum density, for example, is typically used for long-distance haulage whereas a soft core is preferred in drying applications.
The starter roller and the two net rollers combine with the shallow angle of the chamber belts to deliver smooth bale starts. They also ensure reliable bale roll when the chamber is filled to capacity.
The VariPack bale chamber is formed of four endless belts. Made from rubber with two embedded fabric layers, these belts offer maximum flexibility and strength for maximum lifetime. The grippy material combines with the special surface design of the belts for excellent belt-crop contact and no slip for reliable machine performance.
Massive sprockets and chains drive the rollers so these roll the material reliably
The VariPack twine / net film wrapping system is simple, very reliable and easy to operate. The optional net chute helps handling the heavy net roll. It folds out and down to accommodate the roll and slides it into the cradle. The rigid net feeder makes for an easy net feed into the chamber. Spare net and twine rolls are stored on the machine to keep going on long working days.
The fresh roll slides down the chute and into the cradle. It couldn’t be easier for operators. Then the net is threaded into the chamber, which is equally easy thanks to the rigid net feeder. Next, run the net over the swing and into the chamber.
There is room to store one roll of net wrap on each side of the machine. This gives you plenty of net supply that keeps you going during long working days.
Net or twine roll changes are very easy. Simply fold out the optional chute on the left hand side and slide the new roll into the cradle. This takes out the muscle work of changing rolls as you no longer lift the heavy roll up into the cradle.
Highest densities and outputs are the outstanding landmark features of VariPack. More than that, these models also score on a simple design and exemplary accessibility. All this translates into particularly easy servicing and maintenance. The hydraulic cylinders that operate the rear door have stroke end cushioning for fast unloading cycles and maximum throughputs. An optional bale ejector is available for controlled bale depositing also on slopes.
An audible alarm signals the end of the net wrapping cycle. Then the operator opens the rear door by operating a spool. The bale is dropped and the door closes. This takes only a few seconds before the tractor is moving again.
Keeping halts as short as possible is critical for high productivity in round baling. Therefore, unloading the bale effectively and fast is important – a task the optional bale ejector does reliably. At the same time, the ejector is designed to give optimum access to the blades.
VariPack is the machine for quick travel between fields, for undulating and boggy terrain and easy shunting in tight space. A wide range of additional options ensure the KRONE VariPack is perfectly geared to deliver in your specific conditions.
Choose between three different flotation tyre options for the VariPack. The standard size is 15.0/55-17 10 PR and 500/50-17 10 PR or 500/55-20 12 PR are available as options.
VariPack runs on a single single axle that has no brakes as standard but is available with an optional brake system.
VariPack has a standard 40 mm hitch ring for bottom- or top-mount attachment. The drawbar notches easily to height. In addition, three more hitch options are available to suit various needs in specific countries.
An 80 ball hitch is also available for VariPack for bottom attachment. This warrants smoothest rides, better manoeuvrability and minimum wear.
VariPack is designed for maximum performance and density. A number of options are available that help boost your productivity in special conditions. For example, working lights and cameras ensure you always have a clear view out over the machine and the moisture sensor informs you on the current moisture level of the crop.
This package adds comfort and includes LED work lights for all service and maintenance points plus reflective strips under the panels and also rear lights. These lights are a boon when changing net rolls and cleaning the machine at night. Also, they improve visibility around the machine as well as general safety in the field.
The moisture sensor provides exact information on the quality of the harvested material so the operator can choose the baling pressure to suit. At the same time, you are free to choose wrapping or not wrapping.
A camera monitors the machine assemblies and the immediate surroundings, thereby improving both operator comfort and road safety. The camera feeds are either viewed on a separate screen or on a CCI terminal.
This is an option that can be added to the standard net wrapping unit. The machine will then have a twine box on one side which stores twelve balls of twine for sufficient supply of twine during long working days.
Simply pull out the twine box to gain ready access to all service points and drives for cleaning.
VariPack is designed as a simple machine where all service and maintenance points are readily accessible. All grease points are grouped and the chains are automatically lubricated – details that reduce the time spent servicing and increase your productivity. Further comfort details are automatic tensioners on the three drive chains.
All grease points on VariPack are grouped into lube banks for convenient and fast servicing and a longer machine life.
KRONE is the first manufacturer to use only three drive chains to drive all assemblies, a design that obviously also reduces the number of wear parts. In addition to that, chain slack is easily adjusted by automatic chain tensioners with scales.
The two steps on the front give convenient access to the net/twine unit. Swapping net rolls as well as cleaning and servicing is easy and convenient now.
The KRONE on-board Comfort electronics streamline, improve and accelerate all steps of baling, making the baler great fun to use. You can choose from various KRONE terminals the unit that suits you best.
The DS 100 control unit controls all VariPack functions from the convenience of the cab. The buttons are grouped for intuitive use without looking so you can focus on the machine.
The DS 500 terminal has a user-friendly 5.7inch touch screen, twelve keys and a dial on the back. The unit is not only used for VariPack but also for all other KRONE machines. Even more comfort comes from the AUX joystick that is available as an addition to the DS 500.
The CCI 800 is the ISOBUS terminal with an 8.0inch touch screen and 12 function keys. It can be extended by a joystick or a camera system for optimum operator comfort. A function is selected by pressing an icon on the left hand side.
Offering a large 12.1inch colour touch screen, this terminal has two side-by-side views, one view showing the camera feeds and one the individual machine functions. The CCI 1200 is an ISOBUS terminal that is universally compatible with different machines and makes.
You can also use the terminal on your ISOBUS compatible tractor to operate the VariPack. If your tractor has an ISOBUS terminal, you won’t need an extra terminal in the cab.
TIM (Tractor Implement Management) is an option that allows your machine to communicate with the tractor and control it. This means the baler automatically stops the tractor to start the tying cycle, opens the rear door when tying is completed and closes the door after the bale has been deposited. TIM reduces operator fatigue, downtime, fuel consumption and leads to more uniform bales and boosts your productivity.